*TOP* Nisca L201, Laminator für PR-C201

L201 Laminator

Extend the life of your ID card with lamination protection
 
--------------------------------------------------------------------------------

Add the L201 laminator feature with dual-sided lamination to the PR-C201 retransfer card printer. The new laminator option will provide an extra layer of protection and security which is an essential security element for government credentialing, state driver’s licensing and for organizations with high security requirements. In addition, this model provides increased durability and prolonged card life by preventing image fading and dye migration that can occur with normal card use. Lamination can be field-installed even after your purchase!


Lamination Method
Hot roller with temperature sensing at the roll surface

Lamination Area
Full card thin film lamination
 Patch lamination 3.36 x 1.97 inches (82 x 50 mm)

Ribbon Dimensions
Width 2.26 inches (60 mm)
 250 patches or total of 2.26 inches (60 mm) outside diameter

Card Dimensions
ISO CR-80 size

Black Marking
Adopted to the existing ribbons

Card Movement
Bidirectional. To allow dual-sided lamination (using flipper inside the printer)

Card Recognition
Detected at laminator entrance to take over the card coming out of printer

Ribbon Control
Movement and originality of ribbon is controlled

Speed Range
0.08 – 0.71 inches/sec (2 - 18 mm/sec)

Temperature Range
212 – 356° F (100 – 180℃)

Interface Connection
Serial communication to the printer using special protocol

Casing
Metal casing

Hardware Connection
Hanging mechanism makes it easy to hang on printer
 Unit is mechanically attached to the PR-C201

Power Supply
Input range 100 – 240 v/47 – 63Hz

Output
24v, 3.75A

 

Produkt Bild
4104
3.800,00 CHF zzgl. MwSt.
4.092,60 CHF inkl. MwSt.
Verfügbarkeit: stock image

Hersteller Nisca
Artikelnr. L201
-
+
Mehr Informationen zu diesem Produkt finden Sie in der folgenden Beschreibung. Bilder sind oft allgemein gehalten und können auch vom Produkt abweichen.

L201 Laminator

Extend the life of your ID card with lamination protection
 
--------------------------------------------------------------------------------

Add the L201 laminator feature with dual-sided lamination to the PR-C201 retransfer card printer. The new laminator option will provide an extra layer of protection and security which is an essential security element for government credentialing, state driver’s licensing and for organizations with high security requirements. In addition, this model provides increased durability and prolonged card life by preventing image fading and dye migration that can occur with normal card use. Lamination can be field-installed even after your purchase!


Lamination Method
Hot roller with temperature sensing at the roll surface

Lamination Area
Full card thin film lamination
 Patch lamination 3.36 x 1.97 inches (82 x 50 mm)

Ribbon Dimensions
Width 2.26 inches (60 mm)
 250 patches or total of 2.26 inches (60 mm) outside diameter

Card Dimensions
ISO CR-80 size

Black Marking
Adopted to the existing ribbons

Card Movement
Bidirectional. To allow dual-sided lamination (using flipper inside the printer)

Card Recognition
Detected at laminator entrance to take over the card coming out of printer

Ribbon Control
Movement and originality of ribbon is controlled

Speed Range
0.08 – 0.71 inches/sec (2 - 18 mm/sec)

Temperature Range
212 – 356° F (100 – 180℃)

Interface Connection
Serial communication to the printer using special protocol

Casing
Metal casing

Hardware Connection
Hanging mechanism makes it easy to hang on printer
 Unit is mechanically attached to the PR-C201

Power Supply
Input range 100 – 240 v/47 – 63Hz

Output
24v, 3.75A

 

Liveticker - das schauen andere Kundinnen und Kunden soeben an: